UV with immersion AquaForte: sterilizer UVC whose lamp is immersed in a large container: this in order to benefit from a maximum yield.
Since the lamp is positioned directly in a tank (filter, collector, drum filter etc.) it does not cause any load losses on the hydraulic network of the basin.
The circulation pump is relieved since it no longer has to force the passage of water into the duct and the connections of the UV which are sometimes very narrow.
This helps to improve the flow rate of the pump.
Since the penetration of UVC radiation into clear water is of the order of several tens of cm, a cylindrical volume of 50 cm to 100 cm in length can be completely irradiated in a few seconds. Very good performance!
It is obvious that this type of UV is to be positioned exclusively in the biggest spaces that are, in order to benefit from a good yield.
The AquaForte model can be installed in any tank thanks to the optional wall bushing (48 mm hole).
Modèle | 40 W | 75 W | 40 W Amalgam | 80 W Amalgam | |
Puissance | Watt | 40 | 75 | 40 | 80 |
Durée de vie de la lampe | heure | 9000 | 9000 | 12000 | 12000 |
Longueur 1 quartz | mm | 630 | 630 | 335 | 630 |
Longueur 2 hors tout | mm | 815 | 815 | 520 | 815 |
UVC radiation is harmful to eyes and skin and can cause serious damage.
Do not operate the lamp out of water: the appliance must operate only in a closed and opaque container, with a cover secured for children.
A switch must cut off the power to the device in the event of an intervention.
Always keep the device in immersion (for your health, and the durability of the device).
The user is solely responsible for the dangers of exposure to UVC.
This set of components is complete but sold without 230 V plug, gloves or protective goggles: it must only be installed by a qualified person in accordance with DIN EN 60335.
OUR COMPANY CANNOT BE HELD RESPONSIBLE FOR ANY INJURY FOLLOWING THE USE OF AN IMMERSION UV.
This device is intended to equip a filter or container designed for this. If you decide to acquire such equipment, and have it installed in your filtration, you must ensure that it is impossible to have visual or direct contact with the UVC lamp. This is your responsibility.
We only sell branded immersion UVs, designed for filters of the same brand, or devices that can replace the first ones but on the condition of using them as indicated in the manual of your filter.
Red Label immersion UV: UVC sterilizer whose lamp is immersed in a large container, a drum filter... in order to benefit from maximum performance.
Replacement UVC lamp Inazuma HD Pro 50000 Two models depending on your system version.
Replacement lamps for Red Label / Sansai / Filtreau 40 or 80 Watt Amalgam immersion UV.
Aquariolux ballast for immersion UV, with cable and stainless steel connector for the lamp. Suitable for T5 42 Watt> 105 Watt Amalgam lamps.
Ballasts and accessories for installation of VGE professional immersion UV.
Replacement parts for Red Label 40 or 80 Watt Amalgam immersion UV.
Replacement quartz Inazuma HD Pro 50,000 Two models depending on your system version.