Inazuma WebCSA Filter Controller

Microprocessor control with WLAN and app connection (available for Android and iOS).
Easy control of your filtration system by mobile phone or tablet from anywhere and anytime (internet connection required).
Connection for motor, high pressure pump, 2 x UVC, incl. 1 x 230 V outlet with dry-running protection for pond and pond pumps.

OPTIONALLY EXPANDABLE:

on a total of 4 230 volt outputs with individual switching times per channel (activation by code, no assembly required)

by a pond level controller (consisting of a solenoid valve and a water level sensor with a 10 meter cable) Ready for connection with the mains socket of WebCSA
Temperature sensor, digital with mains plug for WebCSA
Everything can be turned on, off and controlled by the app.

TECHNICAL DATA:

230V / 50Hz / 10A

WiFi 2.4 GHz
max. switching capacity 2000 W

The WebCSA command also works without internet or app.

WHAT CAN THIS WEBCSA CONTROLLER DO?

Here is what Inazuma offers when your smartphone is connected (without any subscription):

State of the lid (open / closed) because the lid has a magnetic safety sensor.

Water level in the filter: correct or not.

State of the UVC sterilization system (in operation or not): you can turn it on or off.

Drum status: rinsing or on stand-by.

Summer/Autumn/Winter mode: this function fine-tunes the operation of the filter according to the probable degree of dirtiness of the water according to the seasons (modifiable).

Indication of the number of filter (membrane) rinses since a given date (you can reset whenever you want). This allows the control of the frequency of rinsing and by a simple calculation, the quantity of water used.

Indication of the number of rinses of the waste water chute since a given date (you can reset whenever you want).

Launching a manual rinsing from your smartphone

On / off of the pool circulation pump: in the event of a problem, you can switch off the pump remotely.

Adjustment of the membrane rinsing time (6 to 20 seconds) and the delay between two rinsings in auto mode.

Adjustment of the waste water chute rinsing time (2 to 10 seconds) and number of rinsings per day.

Adjustment of the membrane rinsing time (6 to 20 seconds) in manual mode.

Duration (in days) of special periods during which the filter is in high demand (autumn – winter)

Of course, in the event of an anomaly, you will receive a notification.

You can consult the logbook which will show you all the operations carried out by the system at the exact time!

Optional: water temperature reading

Optional: status and changes to the settings of the automatic water level compensator.

Optional: remote control of 3 sockets allowing the switching on/off of a system such as lighting, ventilation (Power Switch) etc.