This product is no longer in stock
Availability date:
Pack Bactogen & Biobooster Plus
Concentrated formula for the maintenance of the bacterial flora of ornamental ponds
Concentrated blend of good bacteria, enzymes, minerals and trace elements.
Bactogen is explosive for maintenance throughout the summer.
From 10 to 12 ° C, weekly treatment reduces silt, improves the biological quality of the water and the purification cycle of organic pollutants.
Bactogen helps prevent and prevent green water and filamentous algae.
Bactogen is a pond and filter care product which is ideally used in combination with Biobooster Plus.
Distribute in the filter and on the surface of the pond where the water circulation is the best.
Treat only if the water temperature is over 10 ° C.
FOR INCREASED EFFICIENCY
Check the pH and hardness. If necessary, correct these parameters.
If new water is added, remove chlorine and heavy metals (toxic to bacteria) using Neutralizer 24 hours before the first treatment.
Regularly use Biobooster to increase the dissolved oxygen in the water and boost the activity of bacteria.
Respect the dosage indicated on the label
At the start: every day for 5 days.
Maintenance: once a week.
1 Kg of Bactogen treats 10 m³ for 4 months.
CONSERVATION
Store in a dry place between 10 and 25 ° C.
Under normal storage conditions, the product will keep for more than a year after opening, provided it has not been moistened.
Pond regenerator, Biobooster Plus promotes filtration and the activity of detritivorous bacteria.
Naturally reduces silt, filamentous algae and organic waste, visibly invigorates fish.
Biobooster Plus is a concentrated formulation intended to boost the activity of beneficial detritivorous microorganisms in the pond.
Without heavy metals, without phytos agents or toxic products.
The fish are more vigorous and healthier after processing.
Once added to the pond, the concentrated pearls begin to diffuse and the incomparable effect on the filaments and other waste is visible already after a few hours.
Biobooster Plus will then amplify the development of the detritus bacteria Bactogen leading to a radical reduction in the consequences of excess organic matter.
The joint use of Biobooster Plus and Bactogen thus guarantees unequaled results for a minimum of 4 months.
The basin must be properly stirred, adequate filtration.
The operation of a skimmer is an important asset.
On the 1st day, add 4 scoops (or 150 g) per m3 of Biobooster + to the surface of the pool. The product must be distributed as uniformly as possible over the entire surface of the pool.
After a few minutes, start removing any plant waste that reaches the surface.
The more waste you remove, the better the result. Foam formation is normal and transient.
The water may take on a brownish appearance for a few days.
It is not necessary to turn off the UV during treatment.
From day 2 to day 6, add the recommended dose of Bactogen (starting dose) every day.
Check the condition of the filter, clean if necessary.
Then add the same dose of Bactogen once a week for maintenance (refer to the instructions for this product).
The use of Biobooster + being favorable to all the beneficial organisms of the basin, it is recommended to use it on a regular basis as is the case for Bactogen®.
However, it is necessary to respect a period of 15 days between 2 successive administrations of Biobooster +.
Store in a dry place between 10 and 25 ° C.
We offer you packs including 1 Bactogen and 1 Biobooster Plus, to choose from:
Bactogen 6000 and a Biobooster Plus 6000
Bactogen 12000 and a Biobooster Plus 12000
Bactogen 24000 and a Biobooster Plus 24000
Bactogen 40,000 and a Biobooster Plus 40,000
Bactogen 200 m3 and a Biobooster Plus 200 m3