Bactopool - Aquaticscience

Bathing purifier.

In a biological bath, water is regenerated naturally, so it is necessary to take care, for example, of the quantity of minerals present and the efficiency of the "good bacteria" responsible for the filtration.

It is sometimes necessary to correct some of these parameters, which is why Aquatic Science has developed a range of products specifically dedicated to the mineral and biological balance of bathing.

Bactopool is a mixture of minerals, oxides and natural germs specially selected for their purifying power.

Intended for biological bathing, this highly effective mixture is safe for humans or the environment if used correctly (no phyto, no GMO).

Bactopool is a treatment intended to maintain an ideal swimming area throughout the season. It will normally be administered only two to three times a year.

Start-up

Use 1 scoop (25 grams) per m3 every 3 to 4 weeks, at the start of the season as soon as the water reaches 15°C. Cut the UV

Interview

Half a dose every 2 - 3 months.

Distribute directly on the surface of planted substrates (lagoons) where the circulation of water is good.

The unsoluble powder may lightly bleach the water a few days.

For this reason, avoid areas of traffic that are too strong or close to the bathing area to avoid the passage of minerals into the bathing area.

Even after several weeks, avoid aspiration areas where Bactopool has been spread.

For increased efficiency

Regularly measure hardness (GH and KH) and pH.

If they are too low, correct by adding Neo GH Plus and Neo KH Plus.

Bactopool is a treatment intended to maintain an ideal swimming area throughout the season.

It will normally only be administered 2 to 3 times a year.

Under certain conditions (excessive rain, water turnover or abnormal pollution) an increase in frequency may be necessary.

Conservation

Keep dry, closed jar, between 10 and 30 ° C

Conditioning

Bactopool 5 kg - for an organic bath of 50 m3.

Bactopool 10 kg - for an organic bath of 100 m3